PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   BLINK CODES (http://www.peachparts.com/shopforum/showthread.php?t=286881)

300e.bess 10-20-2010 03:02 PM

BLINK CODES
 
1993 300e 2.8, 124.028, 104.942 I have the blink codes, but I have no meaning for them. they are (16 pin) pin 8 is 13 blinks and pin 14 is 11 blinks. Help!!

pawoSD 10-20-2010 03:09 PM

Probably EGR and Oxygen sensor if I recall the codes correctly.

300e.bess 10-20-2010 06:54 PM

Hi, thanks for the information.. Is there a way to check these??

George560sel 10-21-2010 08:30 AM

Here is the code and test/remedy for pin 8
http://www.startekinfo.com/manual/volumes/e2/1_1/m11.jsp

pin 14 w/ ASR
http://www.startekinfo.com/manual/volumes/e3/6_4/m11.jsp

pin 14 no asr
http://www.startekinfo.com/manual/volumes/e3/7_3/m11.jsp

Kestas 10-21-2010 12:14 PM

Pin 8, Code 13: O2S (Lambda) control system operating at rich or lean limit.
Likw pawoSD said, this may indicate a problem with the O2 sensor.


Pin 14, Code 11: Closed throttle recognition signal to engine control module (HFM-SFI or Left LH-SFI), Fuel safety shut-off to engine control module (HFM-SFI or left or right LH-SFI)
I don't fully understand this one. My car threw this code a few times in the past. I wonder if it has anything to do with the ETA wiring issue, i.e., disintegrating wiring insulation.

300e.bess 10-21-2010 03:55 PM

Thanks for the reply, I am changing the O2 sensor this weekend and will check the ETA wiring.

300e.bess 11-15-2010 12:20 AM

Hello, well I changed the O2 sensor and cleared the codes. It ran the same and the codes were back again..

Is there away to check the ETA wiring without removing the unit? I moved the wires going to the eta while the car was running with no change..

vaccin 06-15-2013 02:25 PM

Quote:

Originally Posted by George560sel (Post 2569065)
Here is the code and test/remedy for pin 8
STAR TekInfo

pin 14 w/ ASR
STAR TekInfo

pin 14 no asr
STAR TekInfo

I have attempted to find these procedures for a my car. I do not have an address I live in canada for startek I am looking for help to find these Can someone point me in the right direction

Kestas 06-17-2013 01:20 PM

Is this what you're looking for?:

http://www.peachparts.com/shopforum/tech-help/107630-e320-16-pin-dtc-charts-inc-pin-8-pin-14-a.html

vaccin 06-22-2013 11:23 AM

Quote:

Originally Posted by Kestas (Post 3161996)

I have a 1992 300d I can not find anywhere if these are the same. I have a 8 pin.
StarTek will not allow me to have a 1 year membership.

Kestas 06-22-2013 03:35 PM

Look for "Fault Code Scanner"
 
Dig deeper in that thread. There are links to a MBWorld thread that has a PDF attachment. The attachment is too big for this site. I'm pretty sure it covers your 92 diesel.

vaccin 08-05-2013 11:47 PM

sorry for leaving this thread , thank you kestas


All times are GMT -4. The time now is 04:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website