|
|
|
|
|
#1
11-09-2010, 01:06 PM
|
|||
|
|||
|
need help vacuum routing
installed 300 td into 300 g wagon with manual trans need help with 2 parts and not sure it they need vacuum, 1 in front of turbo circulating air safety valve? 2 at back of inj pump, diapham with 2 ports pics attchd call shop with ideas 406-222-3213
|
|
#2
11-09-2010, 04:54 PM
|
|||
|
|||
|
First picture is of the turbo. no vacuum needed there.
2nd picture is of the aneroid compensator, needs PRESSURE line from intake to develop correct fuel enrichment.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#3
11-09-2010, 07:12 PM
|
|||
|
|||
|
No 1 pic There is a diaphram in the front half of the turbo
No 2 pic Where do you pick up a pressure line from?
|
|
#4
11-10-2010, 12:13 PM
|
|||
|
|||
|
is it possible pic #1 turbo diapham goes to pic2???
|
 |
| Bookmarks |
|
|
Linear Mode
