HELP! just screwed up wiper again. need part.
 

I don't know what the heck just happened.

87 300D

I was testing the new wiper motor and it all looked fine, i hooked up the linkage and got back in to test it, and the unit must have shifted over and touched the battery or something. Smoke started pouring out the wire harness for the wiper motor!

Please, does anyone have this piece they can get to me? how badly am I screwed? Do I have to now remove the dash to fix this? (I was going to anyways to replace the vac pods and the dash itself... but don't have the cash to do it this instant....

http://www.peachparts.com/shopforum/...1&d=1289321830

http://www.peachparts.com/shopforum/...1&d=1289321861

Scratch that. I already fix it.

Had to remove the Dash and trace the burned wire all the way back to the main ground block on the drivers side and replaced it. was able to salvage the connector and to look at it you would never tell anything happened. Tested the wiper motor and it's fine.