|
vacuum pump for door locks
i am replacing the vacuum pump, is there a special tool to remove the tube connections without breaking anything?? they dont come off easily.....
|
I have been told a 7mm open end wrench will help!
|
No they just pull off, they are hard but they will come off.
|
They do pull off. MB bulletin 80/5 Feb 1995 " remove lines using 7mm open end wrench". I used a tool to remove door panel pins which worked great
|
| All times are GMT -4. The time now is 11:13 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website