|
|
|
|
|
#1
02-24-2011, 09:51 PM
|
|||
|
|||
|
94 e320 transmission Overload Protection Switch question
I am in the process of replacing this switch as a pin has broken off somehow. Anyone have an idea what this switch does? Also if anyone knows if the way it is plugged in matters? It doesn't have the usual mercedes grooved plug that allows one way only to plug in. Thanks in advance.
__________________
1994 E320, 145,000 miles 
|
|
#2
02-25-2011, 08:04 AM
|
|||
|
|||
|
Sends signal to retard timing when that band (B1) is applied.
The electrical connection does not matter.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#3
02-25-2011, 12:47 PM
|
|||
|
|||
|
wow thanks again mbdoc! I don't know how long it has been this way, but lets see if i notice a difference
__________________
1994 E320, 145,000 miles
|
|
#4
02-26-2011, 06:04 AM
|
|||
|
|||
|
Here is a good post on replacing this switch.
http://www.peachparts.com/shopforum/showthread.php?t=144744
__________________
1993 400E, 256,000 miles (totaled) 1994 E420, 200,000+ miles 1995 E420, 201,000 miles
|
|
#5
02-27-2011, 12:06 AM
|
|||
|
|||
|
thanx emerydc8 nice post will keep those steps in mind ... hopefully will remember to take pics too
__________________
1994 E320, 145,000 miles
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
