![]() |
|
|
|
#1
|
|||
|
|||
2001 C240 has OBDI code P0173
I tried to reset twice , the code of course comes back after 3 starts.
Freeze data indicates that it is always triggered at idle speed: Eng speed RPM 725 Calc. Load 24.7 Map KPA 37 Coolant 183 ST FTRM1 % -2.2 LT FTRM1 % 17.9 ST FTRM2 % 0.0 LT FTRM2 % 19.5 ST FTRM3 % -100.6 LT FTRM3 % -100.6 ST FTRM4 % -100.6 LT FTRM4 % -100.6 Veh Speed 0 Fuel Sys1 CLSD Fuel Sys2 CLSD I think the problem is MAF sensor. Can somebody please confirm this, the MAF aint cheap so I wanted to be a bit more sure. Thanks. |
#2
|
|||
|
|||
Looks like an air mass sensor, have you checked fuel pressure? 55psi regulated by filter?
I would think $225-250 for Bosch 0-280-217-515, would be a good price.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
|||
|
|||
Thanks mbdoc, I have not checked the fuel pressure. I will, at 145k that fuel pump is certainly tired
![]() |
#4
|
|||
|
|||
I checked the pressure it seems to be not quite 55 but fluctuating and below 55, So I don't know if the pump or mass air sensor are causint the CEL?
|
![]() |
Bookmarks |
|
|