![]() |
MB 300 CE Problems to start!!!!
I was driving my MB 300 CE 1992, and suddenly turned off by itself, all the system. 2 0r 3 seconds later the dashboard lights automatically turned on. I tried start my carr again but nothing. only cranks and cranks.
I checked the fuse box located on the dirvers fender, (I dont know if there are some more important fuses to check). all them ok. Then I checked the coil witn a tester, it receives power but apparently dont send enough power to the distributor. I changed distributor cab, rotor and tried with a similar coil... the problem is still there. I already replaced the crankshaft sensor, camshaft sensor, but the distributor not receive spark from coil.... I tied with a used CIM too, but my car not start, I dont believe the 2nd CIM is damage too, but could happen. ok.. I did all possible by myself. Something else I can try???? If this can help, 1 month ago my cylinder key was stuck. I replaced all the ignition lock system for a used one. the diference is that the conector has 7 pins and the original has 8 pins. but the car was working for around 15 days... |
Find out for sure if the problem is lack of spark or lack of fuel.
Fuel pump relay a strong possiblity, very common. |
Thanks. im going to check the fuel pump relay.
Quote:
|
Get in there and wiggle them. My daughter's car was doing the same thing and getting really bad. I had here come over, wiggled them and re pressed them down. No problem since. Good luck!
|
| All times are GMT -4. The time now is 01:38 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2026 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website