|
|
|
|
|
|
|
|
#1
|
|||
|
|||
|
Seafoam
What is seafoam, and is it worth running through gas tank. What will it do by adding to gas?
Thanks. |
|
#2
|
||||
|
||||
|
Seafoam (unless they have a new product) is most effective when fed through the intake, allegedly cleans out the combustion chambers, intake. I haven't used it on an MB, but it did help clean out the intake and plenum on my mitsubishi when I used it, but no real performance difference along with a ton of smoke when using it. I would guess that adding it to the gas would be advertised to clean injectors...but there is a lot of snake oil out there...
__________________
TC Current stable: - 2004 Mazda RALLYWANKEL - 2007 Saturn sky redline - 2004 Explorer...under surgery. Past: 135i, GTI, 300E, 300SD, 300SD, Stealth |
|
#3
|
||||
|
||||
|
Redline,Moly and even Chevron's Techron
Do the job without the BallyHoo (Or Snake Oil).
"SeaFoam" is generated by an OnShore Breeze and shouldn't be introduced into ANY engine.(Salt Water is the King of Corrosion)
__________________
'84 300SD sold 124.128 |
|
#4
|
||||
|
||||
|
Seafoam does a fairly credible job of removing intake build up, but as said, through the "hot soak" intake vacuum method rather than as a fuel tank additive.
|
|
#5
|
||||
|
||||
|
Here you go: plus proof
http://www.peachparts.com/shopforum/showthread.php?t=279293&highlight=lsmalley+seafoam
__________________
1990 190E 3.0L |
|
#6
|
||||
|
||||
|
Skip it. There are real fuel additives out there, there is no 'one can, fix all' type of stuff. Snake oil is good, but I would call it something on the terms of Horn Oil or Carburetor Belt.
![]() Intake buildup can be rid of over time with just slightly more aggressive driving. i.e. going WOT and keeping it there on the freeway and other places where safe/legal when the motor is at full operating temp.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
|
#7
|
||||
|
||||
|
Regardless, we at least know that the seafoam can't hurt....but I still am a firm believer in it and my HC, CO, O2, & NO numbers reflect that after just a few days of failing my first smog without seafoam.
__________________
1990 190E 3.0L |
|
#8
|
||||
|
||||
|
Do the same thing with water and save the $10.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
|
#9
|
||||
|
||||
|
will that work?
__________________
1990 190E 3.0L |
|
#10
|
||||
|
||||
|
Provided a smoke show for me in the past. All it does, that I can figure, is just shock the carbon to come out of the chambers due to the variances in temperature.
As with the Seafoam, you have the very slowly induce it to avoid hydrolock. I avoid this now and just run a car hard about once a week and it seems fine, even vehicles I own with horrid PCV systems clean up after a while with 'spirited' driving.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
|
#11
|
||||
|
||||
|
Quote:
__________________
TC Current stable: - 2004 Mazda RALLYWANKEL - 2007 Saturn sky redline - 2004 Explorer...under surgery. Past: 135i, GTI, 300E, 300SD, 300SD, Stealth |
|
#12
|
||||
|
||||
|
Yup, at least the cleaning of the intake. Grab an old toothbrush and start scrubbing. As long as you can put in the work its money in the bank
__________________
TC Current stable: - 2004 Mazda RALLYWANKEL - 2007 Saturn sky redline - 2004 Explorer...under surgery. Past: 135i, GTI, 300E, 300SD, 300SD, Stealth |
|
#13
|
|||
|
|||
|
Seafoam may not have that great of an effect on a one owner, factory maintained car. Most often its the neglected beater that shows greatest improvement.
__________________
http://i193.photobucket.com/albums/z...-RESIZED-1.jpg 1991 300E - 212K and rising fast... |
|
#14
|
|||
|
|||
|
Imho---If you like the sea-foam; use it. Won't hurt anything. The absolute best fuel system additive is BG 44k. Best to use just prior to changing the oil. Stuff ain't cheap, but i've found none better...
|
|
#15
|
||||
|
||||
|
Put it all in you gas tank. Helped me with slow starts on my 91 300E. I also put it in Altima SER and it took care of the check engine light. If you put it in your oil, be prepared to start seeing oil leaks on an older car. It loosens up sludge and sediment deposits that may be acting as gasket material. It does work. And I despise snake oil.
|
![]() |
| Bookmarks |
|
|