where can I find these parts?
 

looking for an under carriage shield/skid plate for my w201. also, is there one that fits over the engine as well?

MB made heavy plastic under engine covers for protection and sound proofing.

2.3L
84-85 201 524 12 30
86-88 201 520 60 23

91-93 201 524 16 30 (Front of engine cover)
91-93 201 520 85 23 (Right side of engine cover)
91-93 201 520 42 23 (Left side of engine cover)

2.6L
Front 201 524 16 30
Sides
to VIN F755015
R) 201 524 18 30
L) 201 524 19 30

From VIN F755017
R) 201 524 36 30
L) 201 524 19 30

In Europe, MB sold steel skid plates for under the engine bay:

One for all models without aircondition: 201 520 20 42 (or 201 520 00 42, 201 520 04 42, 201 520 10 42) ca. 100€

Two for models WITH Aircondition: 201 520 25 42 (Before facelift) ca. 197€ and 201 520 26 42 (From facelift) ca. 179€


MB only made hood pads for the underside of the hood. The tubodiesel model had a special pad that had a metallic piece for over the turbocharger.

is there a website to order?

I"d suggest starting with Fastlane (link at top of page) and email with the correct part nos.

Other sources include:

Parts.com
buymbparts.biz
dealers that advertise in MBUSA magazine such as Anaheim MB
your local dealer

Don't forget you'll need Tinnerman clips and screws for mounting the panels.

Good luck.

Plastic undercover shield for W201
 

I have the undercover shield that came off my 1992 190E 2.6. It is in excellent shape - a little dirty and greasy. It is a BIG piece of plastic!!! Let me know if you want it.

Benzguy1987,

Do you have all the necessary screws and clips? If so, yes I would be very interesed

I just have the skid plate....

Those are NOT skid plates!

They are encapsulation panels that help smooth the air flow and minimize turbulence under the car, as well as keep sand and other minor debris out of the engine compartment. It's useful for what it does, but it's not a "skid plate."

We had a custom skid plate fabricated from heavy-gauge aluminum for our stage rally racer, to help us bounce over rocks, logs, small- to medium-size animals and other such impediments to speed found out on the stages. It protects the oil pan and transmission in the front, and we have another one in the rear to protect the fuel pump.

What are you trying to accomplish?

Best Regards,
Rob

trying to protect the components under the front as well as possibly minimize sound

Are the W124 and W201 undertrays the same?

No they are not, and the diesel are different than the gas, 4matic different still.

I have a used encapsulation panel. It carries p/n 201 540 XX 23 (the XX position numbers are not readable). Its from a 1986 190D. Also have 4 clips (new) that snap into the chassis. With luck I may be able to find the screws/washers that held it. $44 includes shipping in the contUSA.

The encapsulation panels really do help keep dirt and such out of the engine bay and smooth airflow out for sure. I'm putting my W124's back on soon after I fix one of the broken clips that goes into the chassis.

Will the '86 190D part fit a '90 190E? The post from MTI doesn't mention a p/n with '540' after the 201 in the sequence.

MB made heavy plastic under engine covers for protection and sound proofing.

2.3L
84-85 201 524 12 30
86-88 201 520 60 23

91-93 201 524 16 30 (Front of engine cover)
91-93 201 520 85 23 (Right side of engine cover)
91-93 201 520 42 23 (Left side of engine cover)

2.6L
Front 201 524 16 30
Sides
to VIN F755015
R) 201 524 18 30
L) 201 524 19 30

From VIN F755017
R) 201 524 36 30
L) 201 524 19 30

In Europe, MB sold steel skid plates for under the engine bay:

One for all models without aircondition: 201 520 20 42 (or 201 520 00 42, 201 520 04 42, 201 520 10 42) ca. 100€

Two for models WITH Aircondition: 201 520 25 42 (Before facelift) ca. 197€ and 201 520 26 42 (From facelift) ca. 179€


MB only made hood pads for the underside of the hood. The tubodiesel model had a special pad that had a metallic piece for over the turbocharger.

Were you able to find one? Even the plastic belly pan?