Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-22-2002, 10:33 AM
Tump's Avatar
Registered User
 
Join Date: Jun 2001
Location: Westchester, NY USA
Posts: 183
Head Gasket Replaced -- MPG drop -- Questions

Dear Fellow MB nuts,

I posted this as an update to my Head Gasket thread, but since this has now evolved into a seperate question, I'm reposting it here as a new thread.
Regarding my 87 300E with about 160,000 miles (or more) that through November, 2000, used 1 to 1.5 quarts of oil every 1500 to 2000 miles depending:

I did some research and found that the camshaft and stem seals were replaced in 1994, 7 years or approx 100,000 miles ago. Before doing my head I replaced the radiator, expansion tank and overflow tank myself, flushed the cooling system and still after 3 weeks found oil reappearing in the coolant.

So I had the head gasket replaced and the head redone with new Stem Seals, etc. During the job it was found that one pre- cat in the OEM exhaust was completely clogged and fused with oil (the metal mesh surrounding the cat fused to the inside of the pipe) ( I checked this myself and tried after the mechanic did to dislodge this mass with a screw driver -- it would not budge). Apparently, this is where the oil was leaking to. In any case I replaced the header and pre-cat to cat system (its one OEM piece) with a stainless piece manufactured to OEM spec.'s by TimeValve without pre-cats (the new cat I'm told is sufficient to pass inspection -- we will see). This whole job was expensive (I bought my own parts and had the specialists do the work (@$80/hr) coming in for a total cost at a little under $3,600.00. Not bad however for a new header-cat system, remachined head and stem seals, replaced stem guides, timing chain and timing chain tensioner. The head bolts were within spec.

The car performs amazingly well now, is much quicker and smooter, etc. and burns no oil whatsoever at this point. Job was done 1 month ago. But, after averaging 19 mpg before the job for 6 months, the car now is averaging 17 mpg since the job -- the mechanics' claim to be baffled and they readjusted my air fuel mixture (without charge). Readjusting the mixture did not seem to solve this decrease in mpg.

Do you guys have any ideas or suspicions as to why my car dropped 2 to 3 mpg from its previous average when is should be 2 to 3 mpg better -- at 20 to 22 mpg (as per MB rating on this car 20 city 25 highway)? (I do drive the car a little more agressively -- but drive the same roads the same distances and use the same gas and gas stations).

Marc
Rebuit and restored Obsidian Black/Palmino Interior '87300E with Euro Headlights (they are amazing). Wanted OEM 8-Hole 16" Rims with decent tires.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Head Gasket and other items on 300SDL tstarr Diesel Discussion 12 07-10-2004 10:44 PM
e420 head gasket markE420 Tech Help 3 06-12-2002 08:46 PM
Tackling M103 head cyl gasket (need expert tips) pmizell Tech Help 7 12-27-2001 03:54 PM
Head gasket replacement MarkM Diesel Discussion 16 11-02-2001 12:07 PM
190E 2.6 & head gasket issues myronbecker Tech Help 3 03-24-2000 12:00 AM



All times are GMT -4. The time now is 08:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page