|
|
|
|
|
|
#1
|
||||
|
||||
|
Help: CT Emissions failed PO455 & PO 442 cleared then PO 150??
CT Emissions first failed my 97 E420 w/ 187K miles with error codes:
PO455 Evaporative Emissions Systems Leak Detected (large leak) and PO442 Evaporative Emissions System leak Detected (small leak). I changed the gas cap and reset the codes and ran it for a few days and the CE light came on again so i took it to Autozone to read and they said it gave: PO150 circuit condition (heated oxygen sensor bank 2 sensor 1) Explanation: "The powertrain control module uses the oxygen sensor to calculate the air/fuel ratio in the exhaust. Probable cause: 1 oxygen sensor defective 2. fuel system running very rich or lean check other codes first 3. engine misfire condition- repair 4. fuel pressure very high or low-fuel pump or pressure regulator. How is it that this new code appears and wasn't in the first reading? Is the oxygen sensor easy to replace DIY? Thanks.
__________________
85 300CD Signal Red/Tan sold 83 300D Manganese Brown 109K 97 E420 Midnight Blue 197K sold 98 BMW 328i Vert White 100K, sold 95 BMW 525i White 125K, sold 93 BMW 525iT Red 193K, sold 95 E320 Green Wagon 125K, sold 94 E320 White 127K, sold 85 300SD 156K Grey (Annie), sold 84 300D Lapis Blue 170K (Judy), sold 99 ML 320 Black (lease), 1998 C230 White (lease) 00 Honda S2000 Red (lease) 86 Mercedes 300E (sold) 84 Porsche 911 Red (sold), 1965 Porsche 911 White (sold) |
| Bookmarks |
|
|