|
|
|
#1
|
||||
|
||||
w201 How to disable ABS?
My car is going ABS crazy. I pulses everytime I stop from a slow speed (parking lot speed).
Is there a way to disable the ABS?
__________________
Ben 1987 190d 2.5Turbo |
#2
|
||||
|
||||
On a Chevy you unplug it.Should be same on Mercedes.
__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran |
#3
|
|||
|
|||
The ABS is located on the right fender. Remove the cover, a small torx screw holds it. With the cover off, pull both relays out. You will keep the light on and the ABS won't come online.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#4
|
|||
|
|||
Or you could clean the front wheel speed sensors and leave the safety feature to do its work.
__________________
600SEL '91 300E 4Matic '88 240D '83 280SE '77 350SE '73 The most complex systems can fail in the simplest way. Contra verbosus noli contendere verbis, sermo datur cunctis, animi sapientia paucis. i don't believe in the lord! He's never bought me a Mercedes Benz. |
#5
|
|||
|
|||
[QUOTE=daddi;2779204]Or you could clean the front wheel speed sensors and leave the safety feature to do it
.cleaning the sensors will fix the problem,I replaced one bent sensor tip that was causing low speed activation. Ad |
#6
|
||||
|
||||
[QUOTE=Adler;2779410]
Quote:
OK. Will do. Thanks!
__________________
Ben 1987 190d 2.5Turbo |
Bookmarks |
|
|