PeachParts Mercedes-Benz Forum
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   ABS, ESP lights on my 02 clk 320 (http://www.peachparts.com/shopforum/showthread.php?t=305128)

The Clk Man 09-13-2011 08:12 PM
ABS, ESP lights on my 02 clk 320
 
The ABS light come on when it rains and then goes away. Now it comes on an goes away everyday. Any thoughts. :)

mbzman 09-14-2011 02:23 AM
There should be a fault code stored with the light coming on. My first step would be to scan for codes.

Hirnbeiss 09-14-2011 07:16 AM
If you mean BAS, my first guess is the brake light switch. They fail often and it throws these codes.

compu_85 09-14-2011 10:09 AM
A wheel speed sensor probably went bad. First step is to get the fault code read.

-J

spinedoc2304 09-14-2011 10:39 AM
We had the same issue (BAS/ESP lights) in a Chrysler Pacifica that we own. The codes indicated that it was the steering angle sensor in the clockspring. Changed it and the lights went out. Check for codes.

Nick

The Clk Man 09-15-2011 10:15 AM
Thanks guys, I will check the codes. Thanks again. I'm trying to sell my Benz and these crazy things keep happening. I rather they happen while I own the car. I wouldn't want the new owner have to deal with this. :D

The Clk Man 09-17-2011 04:24 PM
Can I buy the brake switch from Peach Parts? :D

The Clk Man 09-17-2011 05:52 PM
Is this what I need? http://cgi.ebay.com/ebaymotors/84-04-Mercedes-Benz-S-C-E-Class-Rear-Stop-Brake-Light-Switch-4-Pin-0015450109-/230663563999?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACLK320&hash=item35b49eaadf :)

compu_85 09-17-2011 06:53 PM
Did you check the codes?

The Clk Man 09-17-2011 07:41 PM
Quote:
Originally Posted by compu_85 (Post 2792825)
Did you check the codes?
No yet, does the code reader have to be a Benz one? :)

compu_85 09-17-2011 09:50 PM
Yes. Don't replace anything till you know what the fault is.

-J

The Clk Man 09-17-2011 09:56 PM
Quote:
Originally Posted by compu_85 (Post 2792903)
Yes. Don't replace anything till you know what the fault is.

-J
Understood. :)

The Clk Man 09-18-2011 03:05 PM
Will the local Autozone be able to read the codes for me? :D

The Clk Man 10-18-2011 03:37 PM
Bump. :D

compu_85 10-18-2011 05:10 PM
You'll need someone with a MB specific scan tool. Some brake shops might have one that will work.

-J


All times are GMT -4. The time now is 02:26 PM.
Page 1 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website