![]() |
|
|
|
#1
|
|||
|
|||
Help me figure out this stupid vacuum issue M103
Ive been chasing this problem around for about 2 weeks now. I'm running out of ideas.
Car: 89 300e, m103 engine. Symptoms: Runs like a dog, no power. I suspected a vacuum leak, and I was right. At idle, I am only getting about 14-15hg of vacuum. Normal from what I searched is 18-22hg. Checked the usual suspects: 1 idle air hoses: good 2 eliminated trans line, ignition advance line, and the line that goes in to the cabin: Good 3 Thinking I might have a clogged cat, I disconnected the exhaust system at the head. I basically loosened all the bolts enough to get me about 1/4 of an inch gap between the head and the exhaust manifold. drove it around the block. Still reading 14-15hg, no appreciable gain in power. 4 I thought maybe I had an ignition problem, so I swapped out the ignition coil. No change. So now I am thinking that either my intake manifold gasket sprung a leak, or possibly my injector seals. What do you guys think?
__________________
Eugene 10 E63 AMG 93 300te 4matic 07 BMW X3 14 Ford F-150 Fx2 |
Bookmarks |
|
|