Gen II Sunroof seal molding rivet help
 

Hey guys,

Following the Glass sunroof retrofit, I opted to replace my aging sunroof seal with a new W140 glass sunroof seal. The steel roof version is continuous between W126 and W140, but the glass seal is a different part number. Also costs twice as much and looks veeery similar :rolleyes:

Anyways, The front and sides have screw on moldings that hold the seal in place, fine and dandy. Now, the rear is a long strip with six rivets in it. a few of these have popped out, causing quite the headache with sunroof operation after installation...

Does anyone know how I fix this? I don't know how to/have a rivet gun, and being in a tight space, don't see how I would fit it in there anyways...


Thanks for the pointers as always,

Carlen