door lock system 560sec 1988

[just-n-time]

I have some trouble with the lock on the drivers door, I pulled the door apart to find a short in the radio, I know, but the radio shuts off when you shut the door. At any rate the plug for the lock fell apart when I touched it. Now I am left with the three wires and no knowledge of there propper posistion. can I get some help Thank you.

[metaprinter]

for a 87 420 sel the three wires go to the actuator. 12volts is White with a red stripe (position 2), Brown is your ground (position 3), and the third is Blue (position 1) which goes to the antitheft system.

hope that helps.

[just-n-time]

Originally Posted by metaprinter

for a 87 420 sel the three wires go to the actuator. 12volts is White with a red stripe (position 2), Brown is your ground (position 3), and the third is Blue (position 1) which goes to the antitheft system.

hope that helps.

Ok now if I just had a diagram to show me the posistions in the plug. you see the plug has completely fallin apart. just the wires are hanging in the door so I thought if any one knew the posistions as you then I could make a new plug for the wires. Thanks. looking at the plug in on the actuator what is 1 2 and 3

[metaprinter]

if you can, look at the plug on the other door.

[just-n-time]

I was hopeing I would not have to do that.