![]() |
What's wrong w/my 190E 1987, sometimes hard to start..???
Hi my 1987, 190E 2.3 16 value, has some sort of problem, it is sometimes hard to start; is is fuel injected; I have replaced the fuel pump, fuel filter, plugs, & wires, rotor button, distrubtor cap, it ran great for awhile, but then it became hard to start, & would sometimes, dies after starting & running; this was always a cold start problem; thanks any help would be greatly appreciated..Wilford
|
Check the fuel pressure regulator, check valve and accumulator.
|
Since you say it's a cold start issue, before you spend money on other parts, have you checked your engine's compression in each cylinder? The 2.3-16 is very sensitive to valve train neglect, particularly the valve adjustments via the bucket shims. When out of spec, the exhaust valves can leak. When was the last time those 16 shims were inspected and adjusted?
|
All times are GMT -4. The time now is 10:51 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website