|
|
|
#1
|
|||
|
|||
Control Arm Bushings
I'm in the process of replacing the bushings on a 95 s500. The front bushings on the control are were melded in and very difficult to remove. The bushing at the rear of the arm is completely stuck. It will twist, but not come out. Am I missing something? Is there an easier way to get the old bushings out? A tool that helps perhaps?
Thank you very much, Lyndon Tilson |
#2
|
|||
|
|||
Mercedes has a special tool for this job...The cost is about $800.
__________________
Benzmac: Donnie Drummonds ASE CERTIFIED MASTER AUTO TECHNICIAN MERCEDES SPECIALIST 11 YRS |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
'95 E300 Front Control Arm Bushings | pberku | Diesel Discussion | 3 | 12-15-2004 11:02 AM |
Anyone ever replaced upper control arm bushings on w116? | WANT '71 280SEL | Vintage Mercedes Forum | 1 | 11-17-2003 11:38 AM |
Anyone ever replaced upper control arm bushings on w116? | WANT '71 280SEL | Diesel Discussion | 6 | 11-15-2003 01:03 PM |
Lower control arm bushings | FLANDERS | Tech Help | 1 | 01-08-2003 09:41 AM |
Replacing outer control arm bushings | ED C. | Tech Help | 1 | 03-07-2002 05:19 PM |