|
|
|
#1
|
||||
|
||||
Power window refuses to stop
The driver's door power window on my 1995 E320T makes an awful noise when it fully closes and you do not let go of the switch. This happens also when closing all the windows with the comfort feature.
The motor keeps moving and a loud continuous tack sound is heard from the mechanism inside the door. There is no problem when the window is opened. What could be causing the problem and how may I fix it? Thank you in advance for the input. A. Rosich S320, 1998 E320T, 1995 |
#2
|
||||
|
||||
windex
My w126 300SE recently had a similar problem.
Do a search on the archives. My indow regulator had to be replaced. Some of the teeth were shot. The sheetmetal frame onto which the regualtor is bolted bends a bit outward when the window is closed too tight. This can cause a tearin that area. That can be expensive. Open up the door panel and inspect . For the time being, just roll up the affected windows slightly snug then tap it in until no wind noise is heard. No need to jam it all the way up, sp. with an automatic system. Simple cause may be dirty-sticky window guides. Don't let it go!! good luck
__________________
1979 300D 220 K miles 1995 C280 109 K miles 1992 Cadillac Eldorado Touring Coupe 57K miles SOLD ******************** 1979 240D 140Kmiles (bought for parents) *SOLD. SAN FRANCISCO/(*San Diego) 1989 300SE 148 K miles *SOLD |
#3
|
||||
|
||||
Thank you very much for your answer.
It sounds like the frame is bent as you mention. I'll inspect the guides this weekend and find out. A. Rosich S320, 1998 E320T, 1995 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
power window probs with 109 | kaiser | Vintage Mercedes Forum | 7 | 09-21-2004 04:01 AM |
W201 power window won't go up | 73MB280SEL | Tech Help | 8 | 08-24-2003 10:00 PM |
ML320 power window problem | johng_22 | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 4 | 08-13-2003 05:57 PM |
Dead power window - 300e | jkmmrs | Tech Help | 3 | 07-03-2003 10:00 PM |
Power window stopped now working | larrysiny | Tech Help | 3 | 08-13-2002 04:02 PM |