|
|
|
|
|
#1
02-19-2002, 12:01 PM
|
|||
|
|||
Solution to my 87 300E flooding problem
Back on 2/11 I posted a problem I was having with my 87 300E. The gas was gushing in and flooding the engine. The problem was the little O-Ring under the fuel distributor. This has been replaced and is running great. After about $1,500 in unneccessary parts the cost was $1.10 for the O-Ring.
Thanks to all for your help. The joy of driving a Mercedes is worth the sometimes aggravation. John 
|
|
#2
02-19-2002, 12:11 PM
|
|||
|
|||
|
A faulty o-ring caused the space shuttle Challenger to explode. You got off easy.
|
|
#3
02-19-2002, 01:09 PM
|
|||
|
|||
|
Yes i guess when you look at it that way you are right on.
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 300E 3.2 wiper problem | gsl56 | Tech Help | 10 | 01-30-2005 11:35 AM |
| Help 86 300E ignition problem | jmyers177 | Tech Help | 4 | 01-23-2005 11:24 PM |
| 91 300E overheat problem | talons40 | Tech Help | 1 | 08-18-2003 01:55 AM |
| acceleration problem 1992 300E | bcbehan | Tech Help | 9 | 08-17-2003 10:16 PM |
| Starting/Idling problem on non-U.S. model 300e | rbdrost | Tech Help | 2 | 02-13-2001 08:42 AM |
Linear Mode
