![]() |
|
|
|
#1
|
|||
|
|||
W210, spring compressor needed?
2002 E320s4, 4Matic wagon: WIll I need a spring compressor to replace the front shocks? 135 k miles, and ride is somewhat hard.
|
#2
|
|||
|
|||
Did all 4 shocks on my W210 a couple years ago (replaced with OEM Sachs), no spring compressor needed. They just simply unbolt.
__________________
08 W251 R350 97 W210 E320 91 W124 300E 86 W126 560SEL 85 W126 380SE Silver 85 W126 380SE Cranberry 79 W123 250 78 W123 280E 75 W114 280 |
#3
|
||||
|
||||
gmercoleza, was yours a 4matic wagon?
The 4matic wagon has ride height, accumulators, all that stuff. Paul, I'd have the system checked out before I replaced the shocks. I think there is a fluid change interval for it as well and that may be an appropriate first step. Good luck. |
#4
|
|||
|
|||
Thanks
Gentlemen,
Thanks. I feelthe bumps more harshlyin the front/ The self-levelling rears are reasonably good. I had alook past the front wheel,and was not sure about the spring placement. GMERC, is your car a 4Matic? -Paul T |
![]() |
Bookmarks |
|
|