Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #6  
Old 09-28-2014, 08:47 PM
Registered User
 
Join Date: Feb 2003
Location: Richmond, BC
Posts: 374
Tobybul,, did you find out what problem? My 95 C220 seems same problem as yours. Just did wiring harness, head gasket replaced and fuel pressure regulator. Now, that car is very hard to start when the engine is warm. Cold start -- no problem at all. After driving until engine warmed up..... Turn it off and can start right up again. If wait about 5 to 10 mins, then it is hard start. After start it, still feel little shaking. *** New Bosch MAF was replaced about 3 months ago (before head gasket replaced).

Some more information, that guy helps me to replace head gasket. He put the wrong wiring on the airpump and causes 40A fuse burn when cold start. Also, put the ignition wires into wrong position for the coil. Those I fixed it up!!! I want to know that will oxygen sensor and throttle body can affect on starting!!!
Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page