|
|
|
|
|
#1
10-27-2012, 02:49 PM
|
|||
|
|||
|
1991 190e 2.3L how to remove oil pan?
I replaced the front seal then realized that the leak was at the front of the pan.
Is removing the cross member the next step in removing the pan?
__________________
84 300SD 85 380SE 83 528e 95 318ic 
|
|
#2
10-29-2012, 09:22 AM
|
|||
|
|||
|
The oil pan will come out fairly easy.
You must raise the engine & disconnect the anti-sway bar & drag link.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
 |
| Bookmarks |
|
|
Linear Mode
