![]() |
W203 4matic transverse control arm replacement.
I have to replace the DS lower transverse control arm (2033300307) on a 2003 C320 4matic.
The ball joint is shot. Does anyone have access to the WIS with the "how to's" for this control arm. There seems to be a fair bit of "up" force on the arm from the bushings when the ball joint is loosened from the knuckle. I expected the control arm to just fall slack....it doesn't, keeps pushing up...so I'm thinking there must be a special procedure for installation as opposed to your normal lower control arm. If someone is good enough to share it then please post it or PM me. Thanks |
The bolt is tightened at normal ride height, not with the suspension fully extended.
|
Thanks .... I did know that...but at normal ride height there still is alot of up pressure on the arm at the ball joint.
OK, thanks again. I guess there isn't anything special about it.....anybody know the torque number for the bushing bolts? |
All times are GMT -4. The time now is 09:59 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website