![]() |
torque converter leak
2 Attachment(s)
I just replaced the radial seal behind the torque converter, still have the leak? The transmission is of unknown mileage, but functions well. The car has close to 200K, a 85 190D, not the original transmission., maybe original torque converter?
There is a noticeable wear ring on the torque converter where the old seal rides. With the car running I can see fluid coming from the area just aft of the converter. Do I need to replace the converter, o-ring behind the pump itself? How difficult is it to remove the pump to replace the o-ring? Should I replace, look at anything else? Thanks for any help |
Typically you do all the seals, since the trans is pulled. I always did the pump seals as well.
|
Have re-sealed pump area, no leaks, but no reverse now????
|
All times are GMT -4. The time now is 06:14 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website