![]() |
|
|
|
|
#1
|
|||
|
|||
OVP - wiring diag.
190E 2.3 16v, 1988 - I have the Mercedes workshop manual for the wiring diagrams for the W124,201 but can't find a diagram for the 9 pin OVP plug on the 16V. Not sure if the Diakom.ru diags (engine compartment cont. grids 8-11)are accurate as I am missing a red wire from pin 4 and only 8 of the 9 shown. Any help appreciated.
|
#2
|
|||
|
|||
Do you think someone stole it?
Did you consider the possibility that only 8 out of 9 pins are used? Is there a problem with the car?
__________________
600SEL '91 ![]() 300E 4Matic '88 240D '83 ![]() 280SE '77 ![]() 350SE '73 ![]() The most complex systems can fail in the simplest way. Contra verbosus noli contendere verbis, sermo datur cunctis, animi sapientia paucis. i don't believe in the lord! He's never bought me a Mercedes Benz. |
#3
|
|||
|
|||
Found the relevant diagram and answered my question. All the pins on OVP relay/plug are used, I was checking the connections as the ABS light stays on after start up . As the car is stationary I believe the problem is with the OVP rather than sensors.
|
![]() |
Bookmarks |
|
|