![]() |
ABS Brake System
To All:
I have a 1995 G 320, staright six, automatic, short wheel base four wheel drive. My problem is that my ABS light has come on. Replaced relay and fuse, when I push the transfer case lock switch on the dash to ingage the transfer case the ABS light goes out. I also have a on and off switch for the ABS unit (light stays on regardless of on or off switch, unless the transfer case switch is turned on, ABS switch is turned off and ABS light comes back on), turn off transfer case switch and ABS comes on regardless of ABS switch. Sounds confusing, but I am trying to give all the symptoms regarding the light being on. I have the Bosch ABS ECU #017 545-42 32, and was wondering if there is a shop that can test the unit (out of the car?). I am located in the Seattle area, any help would be appreciated. Thanks Tom V |
It is not likely to be the ECU. Bosch will test certain ECUs, I would find out from your local BSC (Bosch Service Center).
I have not worked on any ABS on "G" cars but they should have onboard diagnostics. that should be tested first before worrying about the controller. |
All times are GMT -4. The time now is 11:01 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website