| 300EVIL |
03-23-2002 07:01 PM |
Help Techs!! Control Arm Bushing Help Needed
I am currently having my front end rebuilt on my 87 300E. Everything is going smooth exept for a modification made to the 87 300E that prevented vibration when breaking. My tech says the upgraded lower control arm bushings are different due to the "two bumps" , "three bumps" on the new set. He seems to think the set with "three bumps" belongs to the lower back control arm section. If someone could check to see what the exact configuration is it would be greatly appreciated!
Thanks!
Adam
|
