Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 11-24-2013, 06:46 PM
Registered User
 
Join Date: Aug 2007
Posts: 3
98 e320 Long crank

Hi All - this topic has had many suggestions - but no cure yet.

98 E320 97,000 miles when purchased, now 135,000. Have not resolved long cranking since purchase 24months ago! Prior to purchase I had MB dealer do a pre purchse inspection.

Was told changing spark plugs would take care of problem.

The sympotoms are irregular, in that: On Cold starts (first start of the day) sometimes an immediate start (normal), other times, cranks for 5 secs prior to starting. On starts within 10 minutes or more after shut down, almost always a normal start. After 10 minutes, irregular starts, some normal, some not. Car rarely sits from Friday to Monday, but when it does it often has an immediate start.

6 or 8 times across the last 24 months when starting after long (5 sec) crank; a mis-fire on cyl 3 code was thrown, car would ran rough at idle without smoothing out. Shut down car, restart and runs smooth at idle.

Car runs normal through driving power range, and never dies, 23 City MPG, 28+ Hwy Mpg.

What's been done:
Jan 12 Plugs were replace with OME plugs purchased from dealer.
Oct 12 Fuel pump, filter and relay - OME replaced by indy.
Nov 12 Replace No 3 cyl coil with Bosch and new MB spark wires on cyl 3. o
Dec 12 Crank shaft position sensor replaced with Bosch sensor
Apr 13 Ran Seafoam Injector cleaner at double strenght thourgh 4 tanks of gas at indy's recommendation.
May 13 Replaced Mass Air Flow sensor Bosch.
Nov 13 Replace Camshaft sensor - OME.
If the problem is a leaky injector: With cyl 3 always throwing the mis fire code, it seems that would be a likely culpert. Any reason to not to replace one injector rather than all 6?
I witnessed the fuel rail pressure test before and after. Pressure dropped like a rock immediately on shut down. With fuel pump, filter and relay replaced, the rail held pressure.

Out of ideas and money!! &
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page