PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Need help. (http://www.peachparts.com/shopforum/showthread.php?t=35088)

fred101 04-03-2002 01:46 PM

Need help.
 
Hi I'm new here, hope this is the right forum.

I have a 2001 C320 and I need help with replacing the motor mounts.
I herd that supporting the motor by the oil pan is not a great idea.

Thanks in advance

BTW the Kleemann clk 55 :eek:

elau 04-03-2002 02:14 PM

Would your motor mounts be under warrenty? I find that hard to believe the engine mounts will go bad in one year.

loubapache 04-03-2002 02:16 PM

<<
I find that hard to believe the engine mounts will go bad in one year.
>>

That is how long these new Mercedes last.:D

fred101 04-03-2002 02:29 PM

Quote:

Originally posted by elau
Would your motor mounts be under warrenty? I find that hard to believe the engine mounts will go bad in one year.
LOL :D

The motor mount were my fault. :D

I'm also not in the mood to go see my locale ass clowns (my MB dealer)

loubapache 04-03-2002 02:38 PM

fred101:

I do think you support the engine on the oil pan but use a wood block between the pan and the jack. Raise it a little at a time.

<<
I'm also not in the mood to go see my locale ass clowns (my MB dealer)
>>

You mean you do not like the helpful MB dealer? Why? Do they always fix your problems if you pay them? Did they pick your pocket?:D

They are just doing their "job." Normal!

If you let them take a look at your motor mounts, there is a higher probability that they will say "that is normal" because your car is under warranty.

Now if a car is out of warranty, Ibelieve "normal" disappears from their vocabulary.:confused:

J.HIDALGO 04-03-2002 03:14 PM

Fred101
 
I used a thick wood block across the oil pan. NO problems. Take you time. In my car, I had to loose the fan cowl to give more room to the lift the engine.
Good luck!
:cool:

fred101 04-04-2002 04:36 PM

Thank you for the info


All times are GMT -4. The time now is 08:59 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website