W126 - wrong brake pads?
1 Attachment(s)
Parts came in from Pelican. Not sure if the rear brake pads are correct. They do not have a sensor cutout like the front ones do for the wear sensor. I have not taken the rear pads out yet, so I can not compare for sure but I expected them to be like the fronts. According to Pelican I bought the correct ones. No? I do NOT have acceleration skid control, code 471, so I bought the ones labeled as such in the first group of rear pads.
|
After not returning my call in six hours, I called Pelican back again. Said I have the right ones. So the wear sensor must not go in the pad like the fronts. Guess I will find out more when I swap the rear pads.
|
I do not believe the rears have wear sensors.
I know the first gen 126 does not. |
Rear pads have NO wear sensors.
|
No wear sensors without ASR option. Mark
|
All times are GMT -4. The time now is 04:06 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website