|
|
|
#1
|
|||
|
|||
W124 - No power to o2 sensor heater
Hello,
I have a 1995 E320 (W124, M104). I am getting Code 12 on the car which points to o2 sensor heater and tested the heater ok. I do not see any power from car to the connector where the oxygen sensor plugs in. I ran a continuity test from the ECM to the sensor and it is fine and there is no short either. I checked for power both with engine off and with engine on. Does ECM cut out power if sensor is not plugged in? Any other thoughts? Thanks |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|