Urgent Help needed 722.6,03 E320
 

:(:(
Help! I pulled my trans to replace the rear main seal. The torq converter did not come out with the trans. I followed the "Alldatadiy.
How do I get the torque converter off?
Did I miss something?
Thanks in advance
Yes, I missed

Missed step: 16. Remove bolts (9) Of torque converter (15) From driven plate.
Access to these bolts is through a cutout in engine oil pan.

Glad you figured it out. Let us know how the whole job goes.

I always take the torque converter bolts off first...

The flywheel and torque converter bolts should be replaced..

While your there, I'd replace the front transmission seal...

Martin

If the torque converter is not unbolted you run the risk of damaging the oil pump or the input shaft of the transmission as you remove it.