|
|
|
|
|
#1
12-30-2014, 08:06 PM
|
|||
|
|||
|
'90 300e ran fine- changed OVP and now won't start?
I had just taken my car out for a spin and it ran great. I swapped in different EHA in an effort to test one I got from eBay and my car rand great. I then swapped in a KAE OVP that I also got from eBay and it wouldn't idle properly and stalled. I put the original OVP ( a 2014 KAE) and now my car won't start. It acts like it's not getting any gas. I can hear the fuel pump kick in briefly as it always does after I turn the ignition on without activating the starter.
I didn't disconnect the battery (negative cable) when I did the OVP swapping. I check the fuses on the OVP and they are still good. What did I do? How do I need to do to get my car to run again? Stumped in Folsom, AL
__________________
03 CLK430 Cabrio 211K Pweter Silver/ Oyster Leather 90 300SEL 214k Pearl Black/ Alto Grey/Black Leather Prior: 85 190E, 88 300TE, 89 300TE, 90 300E 2.6, 90 300TE, 92 300E 2.6, 91 and 93 300SL, 87 Ferrari Mondial Cabrio 
|
| Bookmarks |
|
|
Threaded Mode
