Is anyone aware of shorter, stiffer springs available for the 300TE 4Matic? The front springs on the 4Matic vehicles are of a special configuration that allows the front drive shafts to pass through them, so springs for the 2WD 300TE won't work. Any information is appreciated
|
Sorry these are very special springs. And how many wagon owners do you know that want to lower them? Not a real demand for this product.
|
Whenever you shorten springs; the spring rate also changes, so if you wanted to lower your 4-Matic this might suit your needs. Remember that if you cut them too much new ones are going to "COST". I wouldn't cut very much off at a time, also there are rubber pads at the top of the springs & various thicknesses are available. Always realign after any mods are done.
|
All times are GMT -4. The time now is 05:08 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website