Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-28-2015, 04:32 PM
Registered User
 
Join Date: May 2015
Posts: 2
w210 power seats and power windows

I need some Help I just purchased a 1999 w210 E300 , I had the battery disconnected for a bout 2 days for service . now the power seats do not work correct after reconnecting the battery they work fine but over night the next day they do not . To get the power seats to work again I must disconnect and reconnect the battery.

Prior to service the windows worked now they do no work smooth one has to hold the switch just right and the drivers side sometimes does not work at all. the rear windows work just fine .

Erich. T.

Reply With Quote
  #2  
Old 05-28-2015, 04:39 PM
Can't Know's Avatar
Registered Slacker
 
Join Date: Sep 2010
Location: Sunny CA
Posts: 733
Follow the procedure in the manual to reset the auto-up-and-down feature for the windows. The rockers are five-position with off in the middle, first position either side of off is normal up and down. Push to the second position in either direction and they won't work until you re-synchronize them. (If you don't have a manual you can download one at mbusa's website.)

There is a reset procedure for the seats, let me see if I can find it.
Reply With Quote
  #3  
Old 05-28-2015, 04:42 PM
Can't Know's Avatar
Registered Slacker
 
Join Date: Sep 2010
Location: Sunny CA
Posts: 733
Here's what I had on the seats (from the BW 210 forum):
Quote:
1.) Recline the chair DOWN all the way (flat position) and keep the recline button held down, in that direction, for an extra 5 seconds.
Don't interrupt the process, keep the button held down until you'll hear "click" sound from the switch. It's mean's you reset the stop position for flat position.
Note: you must do in quiet environment to hear "click" sound

reclining from the upright stop to the flat stop without interruption (until hear "click" sound) allows the motor to count revolutions from flat position, so you can restore stop point for upright position.


2.) Recline the chair UP all the way (upright position) and keep the recline button held down, in that direction, for an extra 5 seconds.

Voila! you already reset reclining stop position.
Reply With Quote
  #4  
Old 05-28-2015, 05:14 PM
Registered User
 
Join Date: May 2015
Posts: 2
The seats stop working over a space of time like over night they do not move . I have tried to re set by holding in each position for 10 sec this does not work . The seats work move only when I disconnect and recommend the battery

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page