Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-26-2015, 03:03 AM
Registered User
 
Join Date: Jul 2015
Posts: 23
1989 300se 6cy engine will not restart after driving util 15 min later

I can start the car and drive , but when i shut her down I haved to wait 15 min to restart her. it will turn over and crank but won't start until about 15 min. new plugs , cap rotor,ovr, alternator regulator.could it be the crank position sensor? this car has 89000 miles.this 6 has two sensors, one at the flywheel and the other at the front of the engine.camshaft sensor I believe. the rear crankshaft sensor goes from the ezl to the flywheel. any suggestions? could the fuel relay cause this also. the car starts every moring with no problem until I shut her down, then must wait 15 min to restart.the fuel regulator seems to be ok. no fuel leaking after idle ( a few min when i pull the rubber hose from the regulator.?thanks
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page