![]() |
Battery caps frozen, how to open?
3 Attachment(s)
The battery caps on the 1991 560SEL are frozen tight. I inserted a quarter into the cap; tried to turn the quarter but these babies are locked on tight! I need to check the water level for each battery cell. Any ideas on how to open these puppies?
|
BFS. Failing that, BFS+BFH.
|
Use a wrench on the coin .Or a washer make sure it fills up all the slot in the battery insert turn screw
|
Use a thick flat head screwdriver, or a tool that just fits in the battery cap slot. I use an old drum brake adjustment tool that fits the battery cap slot perfectly ... have never had an issue removing battery caps. You need a tool that will provide adequate torque without trashing the battery cap slot.
|
Some thoughts:
1. Drag link socket 2. Find a chisel that fits and put it in a vise-grip for torque 3. Find a gasket scraper that fits ... 4. There is a drum brake tool (bent up piece of strip steel) that would fit - browse the tool aisles at Sears or Advance Auto and you should find it |
Probably time to buy a new battery!
Anziani '97 CL600 |
Came across this
|
Quote:
|
Recommend buying a new battery from your local MB dealer. The new batteries are maintenance-free ... no caps to remove, and have a sensor that illuminates when the battery is shot.
|
All times are GMT -4. The time now is 02:56 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website