My 1994 E320 wagon have a broken driver side turn signal lens. I had searched the web for instructions to remove and replace the Driver side turn signal lens, including this forum. So far, I have not be able to find the information that I need. The part number is Park/Signal Combination, OEM #1248261143. I ordered the part and waiting for its arrival. Can anyone out there shed some light on this issue? Thanks in advance.

There is a curved release tab at inside part of lens assy pull tab and slide lens forward, to install line up tabs push front to back until it clicks or snaps into place.

The release tab is accessed from the engine compartment on the inside of the fender. A flashlight will help you see the tab. It's gray plastic so refrain from using too much force so as not to break it. Best to put the hood in the vertical position for easy access.

__________________
Fred Hoelzle

I was abled to remove the lens using a long flat head screwdriver due to restricted space in the area. Gently pushed the tab to avoid breaking it and forward toward the engine and sure enough the lens came through loose and pop out. Also, the hood was lifted to vertical straight up to have more access to the area. Thanks for the help to all above who wrote

For some reason the glued on lens dosent hold my 94 was lost after i reglued it , swapped for earlier ones as readily available at pick and pull , the i couldnt find my 94 lens at yard there the first thing stripped off