|
I need to examin the lift mechanism on the driver's side door. The motor runs but no window movement. I attempted to remove the inside door panel but found it to appear like it is glued with some kind of foam to the steel frame. Before I pry it off, any advice on how to do it, and then on how to re-attach it?
Thank you, Joe |
What kind of car do you own???
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN LEAD TECHNICIAN FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Oops, sorry! It's a '79 300D
|
The door panel is held on by clips that pop out when you pull out on them a little. The door panel is also held on by small clips that need to be pulled upwards when removing. Good luck
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN LEAD TECHNICIAN FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
| All times are GMT -4. The time now is 08:16 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website