Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-20-2017, 03:13 PM
Registered User
 
Join Date: Jan 2007
Posts: 193
low manifold pressure

It's a M110 Euro engine. The vacuum seems low. I get pops from backfiring. The airplate often begins to flutter in conjunction with engine running faster at idle. I checked for leaks. Furl pressure seems OK. The PSI in the cylinders is around 125 psi. One is little lower at 110. Is this abnormally low and potentially causing the intake vacuum problem, please

Reply With Quote
  #2  
Old 11-20-2017, 03:31 PM
Registered User
 
Join Date: Feb 2011
Location: Modesto CA
Posts: 4,089
bm:

Begin by adjusting valve clearances: Cold, In. .004", Ex. .010"
Recheck cranking compression pressures

Disconnect all vacuum lines from distributor
Set idle timing to 10* BTDC

What are the results?

Suggestion: Post Once
Reply With Quote
  #3  
Old 11-20-2017, 05:50 PM
Registered User
 
Join Date: Jan 2007
Posts: 193
Hi Frank, the valves were adjusted a couple of weeks ago. They should be just about correct. The timing is at 13 with the vacuum line, around 10 without. The flywheel marker isnt super-steady and moves around a little. I also put in a new exhaust cam, thinking that one of the lobes might be flat. The engine has also had new exhaust valves and guides. What makes its strange is that it'll idle smoothly, then abruptly become uneven with the air meter flutter and higher revs I describe...

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 01:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page