Passenger front window not working and stuck in up position on 89 300E. The procedure for regulator/motor removal is described in the MB shop manual, some DIY posts on the web and in the forum. The first step as described by all, however, is to lower the window most of the way so that the set screws on the regulator tray are accessible. Then the window is raised, wedged and the bolts holding the regulator in removed. I've done a search and found no advice on how to proceed when the window is stuck up.

I assume I should remove the five bolts that hold the regulator in and then carefully drop the whole mechanism down. Any hints? This has to have come up before.

__________________
Jim Wiggin
Columbus, OH
1989 300E