Banjo one way Check valve for fuel distributor
 

I am looking for the Banjo one way check valve the is used on the fuel distributor that runs to the warm-up regulator. I can't seem to get the fuel line connected to the valve that comes out of there fuel distributor that runs up to the warm-up regulator.
Any leads on one will be a big help. It look just like one one that is used on the fuel pump but this one is much smaller
Thanks,
Pete
newmanpc2@verizon.net

NP:

Some additional information will be of help to all parties:
1) What year and engine are involved?
2) Can you post pics of the areas of the FD & WUR that you are trying to connect?
3) If there was a banjo fitting in place in the past, what has become of it?
4) What "valve that comes out of there fuel distributor that runs up to the warm-up regulator" are you referencing?

Banjo one Way Check valve for Fuel distributor
 

This is on a 1982 380sl/
1. There are two fuel Lines that run from the Warm-Up Regulator
to the Fuel Distributor. One runs to the top of the distributor the other one runs
to the drive lower side back next to the pressure Regulator.This the the fitting
this is the fitting that I am looking for ( one way banjo check value )

Here is am image of the fitting that I am looking for [IMG]http://www.**********/images/wp/bosch/w01331627491bos.jpg[/IMG]

M110 Front Main Seal Pushed Slightly Out
 

Sorry posted in wrong area.