Hello

To cut to the chase my question is for a 300E is the rear cat a 2 in 2 out or a 1 in two out?

I see on the magnaflow site it is listed as: a 2 in 2 out 338008 for California, a 1 in 2 out 93507 or 94007 for Federal.

My 1987 300E was first sold in New Jersey but has been in California for about 25 years. It has a one in two out cat.

According to magnaflow they do not make a 1 in 2 out for my car which is now in California. They only make the 2 in 2 out for California.

However on Walker's website they list a 1 in 2 out 81133 for California and NY

I am confused

What is the correct cat for my car and is it available in CA?

Lot of info on Google images .On Google search page look to the right you will see images then in the search box for images put - 300E Muffler Layout . I found one with all the part numbers . good luck

If it was sold in New Jersey, it would have been a Federal emissions car originally. Was it ever converted to California spec?

__________________
Current stable:
1995 E320 157K (Nancy)
1983 500SL 125K (SLoL)

Gone but not forgotten:
1986 300SDL (RIP)
1991 350SD
1991 560SEL
1990 560SEL
1986 500SEL Euro (Rusted to nothing at 47K!)

Gone and wanting to forget:
1985 524TD 167K (TotalDumpster™) [Definitely NOT a Benz]