PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   190E 2.6 (http://www.peachparts.com/shopforum/showthread.php?t=394999)

lsmalley 09-06-2018 10:30 AM

190E 2.6
 
Anyone know where to find new aftermarket axles other than the dealership?

Duke2.6 09-07-2018 11:08 AM

I doubt if you would find anything "new" other than Mercedes, but A-1 Cardone is the biggest rebuilder of CV axle shafts, and I expect they have what you need.

I had to replace an axle on my '91 MR2 at only 45K miles due to a bad CV joint. IIRC the axle was only about 50 bucks with exchange. I was surprised at the low cost considering that the Gen 2 MR2 had unique axles, and only about 25,000 were sold in the USA from '91 to '95. The axle has held up, but has only accumulated about 5K miles.

Duke

porkface 09-07-2018 11:41 AM

look here-

https://www.cvjreman.com/

i would do this before buying new chinese axles. the quality is iffy at best. good luck, chuck.


All times are GMT -4. The time now is 01:51 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website