W210 4matic - OEM part number for lower control arm bushing
 

I am looking for the OEM part number for the front lower control arm bushing.

I can only find the part number for the complete set (A 210 330 05 75).
Unfortunately, this set is unavailable in the Netherlands.

I found the number for the rear bushing (A 202 333 87 14) but not for the front one.

http://test2.ergonomie-advies.nl/images/Bushing.JPG

Rob

Try ordering it for a RWD. #210 330 04 75. It's the same front bushing that you probably need. The kit doesn't have the bushing for the rear portion, so it's a little less expensive.

the A 210 330 04 75 kit has both front and rear, the rear is different, the bushings for the RWD are longer.

It seems to confuse the large part stores over here, the all say the A 210 330 04 75 kit fits the AWD

I can order a front bushing for a RWD, but I can't find if they are the same.

Rob

I've been using the bushing kit for the RWD on both the AWD and RWD for years. (unless we're replacing the rears also) The bushing in question is the same.

Thanks.

I ordered the front and rear bushings.
The rear ones are probably original, after 17 years they are a bit hardened.
Since they are only $15 for a pair (Lemforder) I will replace them all.

Rob