|
|
|
|
|
#1
05-02-2002, 02:38 PM
|
|||
|
|||
|
'88, 300TE Won't keep running, Fuel Pump Advice needed
The car was running fine, just wouldn't start after I parked it for 10 minutes. Problem seems to be in the Fuel Pump Relay input signal as I bought a new relay and it still won't start. Signals on pins are as follows, with key on. 15=+12v, 60= ground, 31= ground, 30=+12V, TF=+1.75V, 87= ground w/key off and open w/key on. 87V=open
If I jump 30 to 87V, the cold start relay is activated and the car will start. Obviously the ignition and fuel pumps are therfore o.k., but something is not signalling 87V to send voltage to the cold start relay, and perhaps elsewhere. I can't see any vacuum hose that is loose or any connection that is questionable. My CD Rom schematics are not very readable, so I would greatly appreciate any assistance with this nasty problem
__________________
'76 240D-Sold '78 240D-Sold '85 300 SD, 165K-Sold '88 300 TE, 165K-Sold '64 Porsche 356C Cabriolet- under restoration '86 560SL 124K Miles-Sold '94 320E Wagon, 74K Miles-128K Miles JUNKED '06 E350 Wagon, 84K Miles 07 SL550, 14K Miles Last edited by Ron Johnstone; 05-10-2002 at 01:49 PM. 
|
| Bookmarks |
|
|
Threaded Mode
