I need some reassurance
 

Well I went and looked at my engine at the tech's shop
and To see my engine sittin there out of the car make me
feel like my baby was in the hostpital. I got really sick and worried.

The tech wasn't there but his helper was and I looked at the engine without the valve covers on and the chain was still intact on the left side, the plastic upper pulley for the chain had some teeth missing,
but I don't know how in the hell the valves could be bad from that
small amount of damage. Is he bull s'nn me? Or and I just paranoid?

He says 4 valves are bad on the side with the broken plastic was and 2 on the right?

The heads were still on? I gave him the car on thursday and other than pulling the engine out he hasn't done anything to it yet!

Sorry I guess I'm venting or maybe I shouldn't have gone over to see it, but I don't know how the tech can come in at 12 noon everyday and have it back to me in 7 working days.

Thanks for the forum to wonder, ask, and vent!

For starters, what model/engine are you referring to?

Faulty valves can be diagnosed without pulling the head.

It would be very tough to second guess your techs opinion as he's the only one who's been in it.

"the chain had some teeth missing, but I don't know how in the hell the valves could be bad from that small amount of damage"

These are close tolerance, interferance engines. If the chain is off by just one tooth, the pistons and valves will contact one another. So in reality, that "small amount" of damage is not so small.

Yep I must be just feeling down
 

He know's better than I oh well,

Guess I never thought it would break.

I felt the same when the dealer replaced my complete front sub frame, under warranty ( or recall I should say ). I saw my car with the whole front end removed. Shocking sight. I felt like I was visiting a family member in the hospital. But it drives like new now...... Have faith.

sbr
'79 450SL
76,000 miles