PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   Help with identifying a bolt (http://www.peachparts.com/shopforum/showthread.php?t=398496)

speednjay 04-11-2019 11:17 AM
Help with identifying a bolt
 
95 E320 I’m wrapping up a head gasket and timing replacement, have this bolt left over and have no idea where it came from. Hoping it’s not an integral part of things and someone could recognize where it would go. Takes a 6 mm hex
https://i.postimg.cc/v44WYCTg/2721-B...A097592141.jpg

https://i.postimg.cc/1gxN9tb2/B02424...-C2-E8-C36.jpg

Jorn 04-11-2019 01:23 PM
Could it be for the heater pipe, to keep it in place, at the back of the head? I only have experience with the M103 and a similar bolt is used for that purpose.

speednjay 04-11-2019 03:32 PM
Quote:
Originally Posted by Jorn (Post 3908948)
Could it be for the heater pipe, to keep it in place, at the back of the head? I only have experience with the M103 and a similar bolt is used for that purpose.
I’ll double check that area. I’m pretty sure I got that bolt in. Its a stainless bolt it’s guessing it’s gotra be on the egr or exhaust

speednjay 04-11-2019 09:09 PM
Found it transmission dipstick tube bolt


All times are GMT -4. The time now is 09:09 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website