PeachParts Mercedes-Benz Forum
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/index.php)
-   Tech Help (http://www.peachparts.com/shopforum/forumdisplay.php?f=1)
-   -   95 e320 codes (http://www.peachparts.com/shopforum/showthread.php?t=399004)

speednjay 06-27-2019 01:02 AM
I’m only getting code 25 now. That’s a plus

Zulfiqar 06-27-2019 11:54 AM
Quote:
Originally Posted by speednjay (Post 3933572)
I’m only getting code 25 now. That’s a plus
You need to get yourself a small oscilloscope and check the signal at the ECU connector. The CMP sensor wiring maybe bad causing no or corrupted signal.

speednjay 07-12-2019 10:03 PM
Haven’t had any extra cash to buy a oscilloscope yet. Now I’m getting a pin 8, 24&25 code. Runs great and doesn’t stall


All times are GMT -4. The time now is 02:27 PM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website